Rajendra Piping & Fittings

What is Carbon Steel Pipes?

Carbon steel pipe refers to a variety of metal tubular products primarily alloyed with carbon. But the term also refers to a variety of steel tubing products. Even though many of the same manufacturing principles apply to carbon steel pipe and other similar alloy tubular goods.

The name Carbon Steel Seamless Pipes refers to the lack of a longitudinal weld seam in carbon steel pipes. It is essentially made out of a single, solid piece of steel. To produce a pipe with the desired diameter and wall thickness, a solid billet is simply heated and stretched across several mandrels. In most cases, a seamless carbon steel pipe with a diameter of fourteen inches or more is rolled from shells.

Manufacturing of CS Pipes

One such widely used by-product of raw iron was carbon steel, which was created by adding elemental carbon to the smelting process in the form of charcoal. Despite its many uses, steel was considered a bad material for mass consumption because it required a lot of time and labor to create.

The Bessemer method, which was developed, uses oxygen blasts to oxidize high carbon, silicon, and manganese impurities in inexpensively produced molten pig iron, making them easy to extract from molten steel. The industrial revolution and the start of the mass manufacturing of carbon steel can be directly attributed to this method. Removing superfluous components from iron because it was considerably simpler and less expensive than adding alloying elements.

Formation of Carbon Steel Pipes

To produce Carbon Steel EFW Pipe, the pipe mill receives coils and billets. Double submerged arc weld, or spiral weld, depending on the capabilities of the pipe mill and the final product’s intended application.

In today’s steel mills, coke is either added to smelted iron ore or scrap metal is melted to produce steel. The molten metal is subjected to a contemporary variation of the Bessemer process to remove undesirable elements. Additional desirable elements are then added, and the steel is cast and cooled into whatever shape the buyers need. As was previously noted, these casts for carbon steel pipe are normally in the shape of coils or billets.